Thank you for downloading Bitwig Studio 1.1.6.
This document lists the changes since
previous versions of Bitwig Studio.
Changes in Bitwig Studio 1.1.6
Released on 19.02.2015.
| FIXED | Buttons not responding in activation popup dialogs. |
| FIXED | Controller API: position observer of cursor device always reports -1. |
| FIXED | On Linux and some keyboard layouts pressing certain modifiers (like Alt-Gr) could stop keyboard shortcuts from working. |
| FIXED | Resetting frequency parameter of comb device resets to lower value than actually possible. |
| FIXED | Devices with certain modulation routings broke the document graph, causing solo to stop working and output to crackle. |
| FIXED | When extending end of raw audio event beyond the maximum length of the event, the successive event might be partially erased. |
| FIXED | Crash when moving notes to different lane in folded note editor after moving launcher clip cursor. |
| FIXED | When copying clips on arranger with automation follow sometimes there could be duplicate automation points on top of each other. |
| FIXED | Solo, routings, sends and browser preview became slow in large projects. |
| FIXED | Controller API: observers for parameters of nested devices don't fire after loading document. |
| FIXED | Unwanted thinning of events when duplicating or copy-pasting automation regions. |
| FIXED | Controller API: has-layers-observer always reports true for plugin devices. |
| FIXED | Automation events imported from MIDI files have wrong value range. |
| FIXED | Controller API: selection observers in cursor device layer don't fire. |
| FIXED | Application could crash if openning a broken document that contained multiple drum chains for a single pad - now it shows error message instead. |
| FIXED | Adjusting tempo on reversed audio in inspector makes waveform disappear. |
| FIXED | Automation events imported from certain MIDI files contain lots of redundant events. |
| FIXED | Controller API: delayed notification of note deletions. |
| FIXED | Mouse-wheel was acting funky on EQ displays and drum machine. |
| FIXED | Button (on/off) automation write affects the automated value outside of the recorded region when recording the first time. |
| FIXED | VST parameters are not restored when assigning a preset to a nested chain. |
| FIXED | Automation not updated correctly in arranger when drag-inserting points in clip content editor. |
| FIXED | Changing track mute during session recording makes the track output remain silent even when not muted. |
| FIXED | EDIT panel layout: automation lane in arranger note editor (clip content mode) shows the content of the clip launcher automation editor instead of arranger automation editor. |
| FIXED | MIDI CC data not imported with MIDI clips. |
| FIXED | Occassional crash when making time selections in the detail editor. |
| FIXED | Potential hang of application when shutting down. |
| FIXED | Prelisten in browser randomly plays loops at wrong speed. |
| FIXED | Moving raw audio snippets can create gaps after the new event end. |
| FIXED | OSX launcher requests to download JRE 1.6. |
| FIXED | Not possible to show the clip launcher in the mixer panel in the dual monitor studio display profile. |
| FIXED | Mixer panel could allow resizing to a smaller height that it should really allow. |
| FIXED | Adding a raw audio clip from browser results in wrong length of the clip. |
| IMPROVED | Controller API: it should be possible to call addDatagramPacketObserver from other observers to make IP address user configurable. |
| IMPROVED | Controller API: add device bank for siblings of cursor device. |
| IMPROVED | Allow the note receiver device to receive the note output of devices and not just tracks. |
| IMPROVED | Increase the maximum number of files that can be dragged from the browser from 50 to 128. |
| IMPROVED | Controller API: better support for navigating device slots. |
| IMPROVED | Controller API: layers in DeviceLayerBank should be sorted by drum pad layout in case of drum machine. |
| IMPROVED | Controller script for CME Xkey. |
Changes in Bitwig Studio 1.1.5
Released on 26.01.2015.
| FIXED | Presets for old chain devices return metadata for old chain device instead of the new one. |
| FIXED | Controller API: direct parameter display values of certain VSTs initially only get reported for a limited number of parameters. |
| FIXED | Wrong start time of sliced sample when slicing using raw slice mode and beat marker slice points. |
| FIXED | Polyphonic bitwig devices was using more CPU than needed until they went to sleep the first time. |
| FIXED | Tooltips do not hide sometimes when switching to different application. |
| FIXED | Add modulation wheel improvements for Novation Impulse controller script from Thomas Helzle. |
| FIXED | Selected file in the used files tab cannot be previewed. |
| FIXED | Controller API: normalized direct parameter values are not reported correctly for chooser or button parameters. |
| FIXED | Controller API: normalized-direct-parameter-observer is not called initially after loading VSTs. |
| FIXED | Controller API: crash when pointing primary device to sampler device. |
| FIXED | Controller API: non-linear direct parameter display values are reported as linear values, but should consider the value domain instead. |
| FIXED | Direct parameters are not listed after inserting VST plugin, only after switching tracks once. |
| FIXED | Controller API: channel note input observer does not work for nested device chains. |
| FIXED | Controller API: initial parameter display values are not send when setting the observed parameter IDs. |
| IMPROVED | Add action to create scene from playing launcher clips. |
| IMPROVED | New controller scripts for Nektar Technology products: LX49, 61 and 88, as well as for iX49 and iX61. |
| IMPROVED | Add option to decide if devices should be saved inside a clip or not. |
Changes in Bitwig Studio 1.1.4
Released on 29.12.2014.
| FIXED | Regression: muting a device following an instrument were causing silence/crackling in 1.1.3. |
Changes in Bitwig Studio 1.1.3
Released on 22.12.2014.
| NEW | Automatic quantization of recorded notes. |
| FIXED | Rare engine crash when bouncing/exporting audio material. |
| FIXED | Crash when ctrl-clicking time selection in the track automation detail editor while clip time selection is made in the arranger overview. |
| FIXED | Application crashes if control scripts tries to set an unsupported automation write mode. |
| FIXED | Crash if dragging files to a track and while those files are being loaded for insertion the track is deleted from the project. |
| FIXED | VSTs which sent MIDI events with invalid timestamps (Liquid Rhythm) could crash the engine. |
| FIXED | Crash in controller API when deleting multiple tracks with backspace key. |
| FIXED | Crash when using context menu on arranger loop region while cue markers are selected. |
| FIXED | After opening Multisample Editor, opening and closing of collapsible tracks in mixer does not work anymore. |
| FIXED | Crash when loading 32-bit float wav files on Linux on older CPUs which doesn't support SSSE3. |
| FIXED | Controller API: crash when navigating cursor to next track while document is closing. |
| FIXED | Controller API: potential crash after controller has been disconnected. |
| FIXED | Rare crash when working with audio files. |
| FIXED | Controller API: assignPolyphonicAftertouchToExpression function didn't work. |
| FIXED | Hybrid track with sampler and a following Bitwig device does not play bounced-in-place audio when the track is not selected. |
| IMPROVED | Updated scripts for Arturia Keylab controller family. |
| IMPROVED | FX audio and instrument chain device should be one device that intelligently determines the preset type based on the devices inside it. |
| IMPROVED | Attach plugin states to projects when saving so that the plugin-states directory in the project folder is not needed. |
Changes in Bitwig Studio 1.1.2
Released on 03.12.2014.
| NEW | We now send out SysEx messages to VST instruments for transpose note expressions if the plug-in claims to support canDo("midiSingleNoteTuningChange") and the other note expressions if the plug-in supports canDo("midiKeyBasedInstrumentControl"). |
| FIXED | Bounce in place turns instrument track into an audio track instead of a hybrid track. |
| FIXED | Moving a project file into a sub folder of the project folder would cause plugin states to be lost if the application was restarted and the file was opened. |
| FIXED | Possible to create automation points on the arranger with negative arranger time for the very first point created by clicking in the margin before time 0. |
| FIXED | Occassional crash when returning to arrangement or stopping a track via controller API. |
| FIXED | PDC: Modulation routings from Audio MOD wasn't correctly compensated in certain cases. |
| FIXED | Engine crash after changing buffer size after audio recording. |
| FIXED | VSTs should never sleep if their GUI is open. |
| FIXED | Moving stretch markers in the detail editor does not snap correctly anymore. |
| FIXED | VST plugins that have a file creation date at the beginning of Unix time are not being scanned (e.g. Sonalksis OSX). |
| FIXED | VST Device knobs don't wake up from sleep when being assigning modulations. |
| FIXED | Pre-roll settings wasn't saved in the preferences. |
| FIXED | Timing bug in E-CLAPand the noise section of E-SNARE. |
| FIXED | Engine crash when switching preset for VST running in bit-bridge mode. |
| FIXED | Rare crash when popup windows are closed on OSX. |
| FIXED | Bipolar macro values are only loaded correctly when loading preset twice. |
| FIXED | First drag of a micro-pitch expression does not snap to semi-tones. |
| FIXED | Controller API: direct parameter observer does not report the latest value, it is always one step behind. |
| FIXED | Engine crash when dragging audio files on clip launcher preview slots on non-preview tracks. |
| IMPROVED | Make it possible to unlock the application while running in demo mode so that users don't lose their work. |
| IMPROVED | Controller API: add observer that reports if the device is nested inside another device. |
Changes in Bitwig Studio 1.1.1
Released on 24.11.2014.
| FIXED | Clip launcher clips we're slowly drifting apart due to accumulating rounding error. |
| FIXED | Some time signature values (e.g. 6/8) look cut off in transport display. |
| FIXED | Channel Aftertouch and Program Change messages didn't work on MIDI in for Linux. |
| FIXED | Controller API: device layer selection does not work correctly. |
| FIXED | Controller API: CursorDevice.addCanSelectNext(Previous)Observer is not updated correctly after script reload. |
| FIXED | Tempo field in audio event inspector does not get updated when undoing tempo edits. |
| FIXED | Controller API: canScroll observers are not called for device layer bank and drum pad bank. |
| FIXED | Controller API: Scene.exists().addValueObserver() is never called. |
| FIXED | Creating beat markers via double-click always prefers onset snapping, even if the preview shows differently and object snapping is disabled. |
| FIXED | PDC does not work correctly for chains of Multi-Out VSTs. |
| FIXED | Timeline controlled launching in clips does not work correctly. |
| FIXED | Dragging note start might result in incorrect order of notes, which causes playback errors. |
| FIXED | Engine crashed when playing audio files with audio I/O running at 192 kHz. |
| FIXED | When dragging an unnamed arranger clip to the browser the default name to save the clip under has "Scene x" appended to the name. |
| FIXED | Helper windows such as DSP graph or Scripting Console should not become full-screen with their parent window on OSX. |
| IMPROVED | Dragging in a device does not always make it selected after the drop. |
| IMPROVED | Controller API: add access to deactivated state to channel interface. |
| IMPROVED | Controller API: add access to open state of plugin windows. |
| IMPROVED | Controller API: distinguish between mixer and editor selection in channel interface (added selectInMixer, addIsSelectedInMixerObserver). |
Changes in Bitwig Studio 1.1
Released on 18.11.2014.
| NEW | Allow renaming controllers in the preferences dialog. |
| NEW | Automatic visual feedback from controllers that shows changes as popup notifications. |
| NEW | Track Crossfader. |
| NEW | Allow to define custom controller settings via the scripting API that are stored in the Bitwig Studio preferences file or project documents. The user interface controls for the script preferences are shown in the Bitwig Studio controller preferences dialog, and the controls for the document settings are shown in the Studio IO panel. |
| NEW | Generalize the cursor concept used in the controller API to generic selections. |
| NEW | Note MOD Device. |
| NEW | De-Esser Device. |
| NEW | Allow modulation of discrete (bool, enum, int) parameters. |
| NEW | Added new transient preservation mode. |
| NEW | Added grain size parameter to audio events. |
| NEW | Improved sound-quality and timing of audio playback. |
| NEW | Tap-tempo (CTRL-click play to use it). |
| NEW | Output effect chains for VST plug-ins. |
| NEW | Route track note output to another track. |
| NEW | Route track note output to multi-timbral VST instruments (with channel selector). |
| NEW | Tracks, Chains and Devices can now be deactivated to save CPU. |
| NEW | Audio Receiver Device. |
| NEW | Note Receiver Device. |
| NEW | Multiband FX-3 device. |
| NEW | Support for multi-out VST plug-ins. |
| NEW | Support for VST side-chaining. |
| NEW | Make all channels have a color property and accessible in inspector. |
| NEW | Control surface script for NI Komplete Kontrol. |
| NEW | Control surface script for ReLoop. |
| NEW | Recording Offset (for correcting the roundtrip latency if its incorrectly reported by the audio driver). |
| NEW | Added Note FX slot to sampler. |
| NEW | Control surface script for McMillen Quneo. |
| FIXED | WAV files that look like other audio file types due to wrong file name extensions cannot be imported. |
| FIXED | Crash when quantizing audio after split to onsets operation in clip launcher audio editor. |
| FIXED | Moving onset by dragging position field does not update position until unselecting onset. |
| FIXED | Mixer volume sliders should reset to their default value, instead 0dB. |
| FIXED | Applying note time quantization on both start and end doesn't work as expected. |
| FIXED | Plugin states not saved if a plugin contains plugins nested inside of its FX slot. |
| FIXED | Note input names in track input choosers might be wrong when multiple instances of the same controller are configured. |
| FIXED | When creating a pan/pitch/amplitude note expression for audio events while playing, the expression weren't heard until the next time the event was playing. |
| FIXED | Crash in controller API when creating cursor clip with zero grid height. |
| FIXED | Not possible to save clips that use plugins. |
| FIXED | Error in API utilities file midi.js. |
| FIXED | Bitwig devices shown as [not present] in browser after saving project. |
| FIXED | Weirdness for automation override with boolean/enum parameters. |
| FIXED | CursorDevice.addCanSelectPreviousObserver and Next are never called. |
| FIXED | Toggling mixer sections via the Control Surface API has no effect. |
| FIXED | Bitwig Studio won't start on OSX 10.9.5 and 10.10 when software from unknown developers is disabled in system preferences. |
| FIXED | Double clicking an arrangement clip does not scroll piano roll of track note editor according to clip content. |
| FIXED | When quantizing notes, the end amount should morph between keeping duration (0%) and quantized end time (100%), instead of keeping the original end time at 0%. |
| FIXED | Crash sometimes when showing a plugin loading error message. |
| FIXED | When scrolling a device chain with many devices the devices towards the end of the chain would not show their name. |
| FIXED | Rare crash when working with rectangular selection. |
| FIXED | Crash when showing context menu in file browser for a folder when there are no bookmarks. |
| FIXED | Regression: crash when setting note start to selected warp marker. |
| FIXED | Regression: 1.0.9 would complain about insufficient disk space when installing packs on a fresh system. |
| FIXED | Crash in controller API when doing undo after adding and removing tracks. |
| FIXED | Playhead is not moving in absolute arranger clip automation editor. |
| FIXED | Certain wav files couldn't be loaded. |
| FIXED | Controller scripts in user directory do not reload automatically like the ones in the installation directory. |
| FIXED | Transport data for internal devices didn't get correctly compensated for plug-in latency. |
| FIXED | Controller API: scene scrolling observers in TrackBank never fire. |
| FIXED | FX returns of individual Drum Machine tracks still audible when solo'ing other track. |
| FIXED | Crash when recovering specific project with VST plugins. |
| FIXED | Device selection frame does not repaint when selection focus changes. |
| FIXED | Keyboard navigation does not work for device layers and drum pads. |
| FIXED | Clip length quantization when recording launcher clips was imprecise. |
| FIXED | Context menu for layers in layer device are missing. |
| FIXED | When closing a plugin's window on Linux we don't send effEditClose message to the plugin. |
| FIXED | Instument and FX layer crash audio engine when deleting a layer due to switching presets. |
| FIXED | It was possible to break the internal state of the peak limiter by hitting it with really loud peaks (like +120dB) . |
| FIXED | Tracks not auto-coloured when they're created by dragging in devices or presets from Browser. |
| FIXED | Engine crashed using diatonic transposer device with shift set at -50. |
| FIXED | After dragging device from one track to another, its nested devices are no longer selectable. |
| FIXED | Engine crash when dropping more audio files onto the clip launcher than there are scenes using the ctrl modifier. |
| FIXED | Arrangement clips on deactivated tracks get deleted when using global record. |
| FIXED | Changing presets while recording should not create new automation lanes for parameters that are changed by the preset for VST plugins. |
| FIXED | Crash when incrementing a discrete parameter's modulation amount using a controller. |
| FIXED | Controller API: accent observer reports wrong value range. |
| FIXED | Rare crash when selecting clip launcher slot on hardware controller while the document is closing. |
| FIXED | Changing presets while recording should not create new automation lanes for parameters that are changed by the preset for Bitwig devices. |
| FIXED | Split audio event by double click in clip content editor only works on first clip in timeline. |
| FIXED | Crash when removing unused controller in Studio I/O panel. |
| FIXED | When cutting raw audio and resizing the start of the left part, the start of right part gets resized too. |
| FIXED | Crash when performing undo after scaling notes via inspector buttons. |
| FIXED | Shuffle going wrong on Step Mod, Arpeggiator and Metronome. |
| FIXED | Controller API: observing the name of send controls via addNameObserver always reports "Send" but should report the name as shown in Bitwig Studio. |
| FIXED | Duplicate Time command does not duplicate automation, even though automation follow is enabled. |
| FIXED | Inserting silence bordering two automation points on the same time coordinate creates unexpected effects. |
| FIXED | Dragging stretch marker on reversed audio clip instantly stretches to extreme values. |
| FIXED | Saving clips or presets that contain VST plugins nested inside another device did not save the state for the plugins that were nested. |
| FIXED | NI Reaktor crashes when changing to another snapshot bank. |
| FIXED | The parameter names in Omnisphere are not shown correctly. |
| FIXED | Engine crashed if it couldn't connect to the remote plug-in host. |
| FIXED | Flat automation line does not move when changing VST parameter. |
| FIXED | When connecting the audio engine to a document, the auto-monitoring didn't update the monitor state of the tracks whose arm setting had changed correctly. |
| FIXED | Note editor becomes slow when Launchpad is attached. |
| FIXED | Engine crashes when undoing the move of a clip that contains automation into a track where that automation didn't make sense. |
| FIXED | Instrument/FX Layer: deleting a solo'ed layer leaves remaining layers muted. |
| FIXED | Crash when dragging an audio file inside the detail editor of an audio clip. |
| FIXED | Controller API: update sendDatagramPacket documentation with information about correct value ranges. |
| FIXED | Delay acts unexpected when set to 10.0 ms and audio buffer is very large. |
| FIXED | Layered editing: notes can be moved and added in locked layers, and no need for layer locking in folded mode. |
| FIXED | Audio editor does not repaint correctly after onset creation. |
| FIXED | Note Editor in FOLD mode: note gets misplaced when moving it out of bounds using arrow key. |
| FIXED | Bug in detection of silence of nested device chains, causing random clicks to appear on attacks in sampler. |
| FIXED | Crash when navigating layer selection of Multi-out plugins on the keyboard. |
| FIXED | Controller API: direct note input should not accept any method calls after it has been disposed, otherwise the controller might appear frozen until restart of Bitwig Studio. |
| FIXED | Setting the play start position using the detail editors ruler area doesn't work with the time-selection tool selected. |
| FIXED | Automation lanes with renameable parameters forget their name after save/load and display empty strings instead. |
| FIXED | Controller API: Clip.getAccent value setters interpret range incorrectly. |
| FIXED | Consolidating audio clips may reveal material that was originally masked by clips. |
| FIXED | Plugin windows that have child windows show empty window when reopening in case they have been closed before by clicking the plugin window button. |
| FIXED | Moving multiple successive raw audio events might alter their start time. |
| FIXED | Audio clip tempo shown as 0.00 in inspector after loading document. |
| FIXED | URL in version update notifications needs to be URL encoded when opening it in the browser. |
| FIXED | Crash when control surface script is restarted automatically due to changes. |
| FIXED | Controller API: send name observer does not get called when renaming send destination in Bitwig Studio. |
| FIXED | When changing the loop region of a launcher clip, it would use the wrong offset causing it to jump when it shouldn't. |
| FIXED | When saving a file within the browser there was a delay of a few seconds before the file appeared. |
| FIXED | Buffer hang "beep" in browser preview player when switching to an invalid file while playing. |
| FIXED | Controller API: creating mixer sections may crash depending on screenIndex parameter. |
| FIXED | Some editing operations doesn't work with standby time-selections. |
| FIXED | Use Drag-Alternate modifier (Ctrl+Shift on OSX, Alt on Windows/Linux) for click-renaming. |
| FIXED | Onsets are created at wrong positions when sample is in raw mode. |
| FIXED | Waveform on unlooped raw audio launcher clips does not take start marker into account. |
| IMPROVED | Navigation of drum pads, device layer and other nested devices via Controller API. |
| IMPROVED | When moving clip loop region and clip is looped, let the start marker follow in a meaningful way. |
| IMPROVED | Added a context menu option to configure per plug-in instance it it should auto-suspend. |
| IMPROVED | VST: Added support for the audioMasterGetCurrentProcessLevel opcode. |
| IMPROVED | Improved solo behavior. |
| IMPROVED | Audio output from any device and chain can now be selected as an audio source. |
| IMPROVED | Controller API: add observers for "queued for record" and "queued for stop". |
| IMPROVED | Better controller API documentation, including API history generated using code contributed by Teotigraphix. |
| IMPROVED | Allow to embed samples inside presets. |
| IMPROVED | Improved Controller Script Console. |
| IMPROVED | Generalize the primary device concept in the controller API towards named cursors, so that the primary device represents a cursor device with the name "Primary". |
| IMPROVED | Redesigned router choosers to support hierarchical menus. |
| IMPROVED | Note output from any track can be selected as a note source. |
| IMPROVED | Upgraded PDC engine. |
| IMPROVED | Clip length for imported midi files should be quantized to full bars. |
| IMPROVED | Improved window close behaviour for plug-ins. |
| IMPROVED | Re-designed GUI for plug-in devices. |
| IMPROVED | Controller API: drum pad bank should not scroll pages with zero-aligned quantization, it should be aligned to C0 instead. |
| IMPROVED | Access to drum pad selections in controller API. |
| IMPROVED | Add author metadata to the controller definition API for better distinction between multiple scripts for the same hardware. |
| IMPROVED | Double clicking a device in the mixer panel in a sub channel (eg drum or layer) would show the track's device chain and not the sub channel's. |
| IMPROVED | Controller API: add access to expanded state of devices and visibility of the macro section and device mappings editor. |
| IMPROVED | Processing latency indication on the Inspector's device chain now have a tooltip showing detailed info about which devices that are contributing to the latency. |
| IMPROVED | Allow to restart controller scripts from preferences. |
| IMPROVED | Controller API: provide a way to get the total number of underlying items in bank interfaces. |
| IMPROVED | Pre-roll now also works in the clip-launcher. |
| IMPROVED | Use a single toggle command for activate/deactivate and mute/unmute, and distinguish between mute and deactivate in menu item texts. |
| IMPROVED | Pre-Roll is now a global setting (was per-document before). |
| IMPROVED | Allow to create new Tracks with the Controller API. |
| IMPROVED | Version the preferences for different versions of the application so that switching from a later version to an earlier version will not lose your preferences. |
| IMPROVED | Allow toggling the Inspector from the controller API. |
| IMPROVED | Detect added or removed controller scripts. |
| IMPROVED | Allow the user to change the name of a Controller without scripting. |
| IMPROVED | Allow to switch between project tabs via the Controller API. |
| IMPROVED | Improve MPKmini script & docs with Bitwig Studio 1.1 features. |
| IMPROVED | Add clip/slot playback state observer to controller API that reports the current state including playing, recording, stopped and the corresponding queued states. |
| IMPROVED | Controller API: allow to observe index of selected track. |
| IMPROVED | Prefix entries in note input choosers with controller device name if applicable. |
| IMPROVED | Better default layer visibility when entering layered editing. |
| IMPROVED | Add arranger view toggles to controller API. |
| IMPROVED | Audition velocity changes with time threshold instead of playing a new note on each mouse move. |
| IMPROVED | Added keyboard shortcuts for Yes, No and OK in dialogs. |
| IMPROVED | Controller API: add observer for position of device within chain. |
| IMPROVED | Controller API: add bank-wise navigation for devices. |
| IMPROVED | ALT+Space showed the System Menu on Windows but shouldn't. |
| IMPROVED | Don't prefix send names with "Send" when reporting names to the controller API. |
| IMPROVED | Controller API: add scene bank interface. |
| IMPROVED | Controller API: add an observer for the current Project. |
| IMPROVED | Solo didn't take channels routed directly to external outputs into account. |
| IMPROVED | Clip launcher now only jumps when changing the loop setting if the clip has played long enough to reach the loop end point once. |
| IMPROVED | Show parameter value knob in automation lane headers. |
| IMPROVED | When deleting a file within the browser there was a delay of a few seconds before the file disappeared. |
| IMPROVED | Controller API: add observer for current display profile. |
| IMPROVED | Add an interface to controller API for getting any action in the application in a generic way. |
| IMPROVED | Automatically show macros when dragging a preset from the browser which had macros assigned. |
| IMPROVED | Add access to clip loop/start and start/stop marker in control surface API. |
| IMPROVED | When a track is armed with an audio source, the vu-meter's for that track in the mixer, arranger and inspector now show the track input rather than its output. |
Changes in Bitwig Studio 1.0.15
Released on 14.10.2014.
| FIXED | Hybrid audio/MIDI interface M-Audio Audiophile 24/96 not recognized as MIDI device in Linux. |
| FIXED | Crash when undoing import of MIDI file that somehow has a null character in a string. |
| FIXED | Auditioning is too loud when changing velocity of notes. |
| FIXED | Sample Priming didn't work correctly for loop-jump using RAW audio, causing audio playback glitches. |
| FIXED | Add SysEx probe command to control surface console. |
| FIXED | EQs could blow-up when using extreme Q values with four-pole LP/HP filters. |
| FIXED | Freeze when moving MOD device within another MOD device's FX chain. |
| FIXED | Overdubbing notes in the clip launcher does not end the undo operation when the user turns off the overdub button. |
| FIXED | Crash if using the bounce modifier and deleting the destination before the bounce completes. |
| FIXED | Crash when dragging arranger clips with automation follow in some circumstances. |
| FIXED | Crash on OSX when switching display profile while an audio interface is configured that is not available anymore. |
| FIXED | Welcome screen doesn't fit on 720p monitors. |
| FIXED | Selecting automation points on the arranger using rectangular selection tool is extremely slow even when zoomed in on small part of the automation. |
| FIXED | NI Maschine drag and drop from plugin into the host does not work. |
| FIXED | Parameter names not shown for UAD (and some other) plug-ins. |
| FIXED | UAD plug-ins all get the title "UAD powered plugin" when added to the device chain. |
| FIXED | Plugin's window header is sometimes out of screen on Windows. |
| FIXED | The list of modulation routings to clear on the context menu of the modulation source now shows a more detailed name of the parameter (including the parent device name). |
| FIXED | Reference time range for duplicating clips is not correct after moving clip (without changing the selection). |
| FIXED | Memory leak in undo history. |
| FIXED | OSX gatekeeper trouble introduced by OSX 10.9.5 and 10.10 Preview. |
| FIXED | Improved Linux MIDI support - Virtual MIDI now works. |
| IMPROVED | Add support for AKAI EWI controller. |
| IMPROVED | Add keyboard shortcut for zoom to fit (Cmd/Ctrl+0). |
| IMPROVED | Show progress when auto-detecting controllers. |
| IMPROVED | Updated scripts from Livid Instruments. |
| IMPROVED | Made auto-detecting of MIDI controllers faster. |
| IMPROVED | When a disk-streaming buffer-underrun occurs (for instance when jumping to a location in a sample which could not be predicted), a fade.in is now applied when the streaming catches up to prevent clicks. |
Changes in Bitwig Studio 1.0.14
Released on 12.09.2014.
| IMPROVED | Add context menu to device macros to swap the macro with another macro. |
| FIXED | Crash when undoing track deletion in some circumstances. |
| FIXED | VST plugins don't open GUI anymore when dragged to the second screen on windows. |
| FIXED | Regression from 1.0.13: bipolar macro mappings work only in one direction. |
| FIXED | Device Macros: when set to bipolar and automated, curve editing is broken after project reload. |
| FIXED | Crash when copying tempo automation to the clipboard and then moving the paste cursor into volume automation lane. |
| FIXED | Launchpad: launching scenes confuses orientations in mix-orientation mode. |
| FIXED | Crash when pasting various clip and time selections into a drum pad. |
| FIXED | Deleting a track that is being recorded into would stop the undo history and saving of documents from working. |
Changes in Bitwig Studio 1.0.13
Released on 13.08.2014.
| IMPROVED | Various improvements in Arturia KeyLab scripts. |
| IMPROVED | Minor style tweak in controller API documentation. |
| FIXED | Crash when dragging a drum pad to another drum pad. |
| FIXED | Regression: automation recording inserts additional points with default value or does not work in some cases. |
Changes in Bitwig Studio 1.0.12
Released on 12.08.2014.
| IMPROVED | JavaScript stub generator for Controller API needs latest updates from TeotiGraphix repository. |
| IMPROVED | MIDI output on OSX sends always 3 bytes data, but should send only one byte in case of realtime data and two bytes in case of channel pressure and program change. |
| IMPROVED | Added javascript stubs for syntax-completion of the controller API within your IDE when developing scripts. Thanks to Michael Schmalle (Teotigraphix) for contributing the code for generating it, and thanks to Trappar for initial inspiration of Michael's project by providing hand-written API stubs. |
| FIXED | Crash when dragging a layer device with layers from a main track onto an effect track. |
| FIXED | Copying or duplicating a plugin device with automation in a clip does not duplicate the automation for parameters in the plugin device. |
| FIXED | Slice to drum machine does not create slice for the last onset. |
| FIXED | Resizing start of reversed raw audio event affects event end time in some cases. |
| FIXED | Korg NanoKontrol2 script has a problem with switching devices. |
| FIXED | Zooming and adjusting timeline grid settings using keyboard shortcuts does not work on certain keyboards. |
| FIXED | Note editor piano keyboard plays notes on wrong track after moving clip to another track while keeping clip selection unchanged. |
| FIXED | Dragging a clip launcher note selection to a new clip does not work anymore. |
| FIXED | Note editor piano keyboard doesn't audition keys until a note is added to the clip. |
| FIXED | Moving a nested device chain could cause weird problems/crashes if the chain's mixer had automation for some of it's parameters (eg volume or pan). |
| FIXED | External Instrument: change of MIDI channel requires audio engine restart to take effect. |
| FIXED | Slicing an audio clip unwarped on the arranger to a drum or multi sampler would create incorrect slice playback clip in the drum track if the clip being sliced did not start at time 0. |
| FIXED | Crash if search indexes somehow get corrupted or truncated. |
| FIXED | Crashes when adding/removing removable media and performance lock-ups on windows. |
| FIXED | Hidden directories are not scanned for VSTs, even when specifically added as location. |
| FIXED | MIDI clock sync does not work on Linux. |
| FIXED | Doubling content of selected arranger clip also unselects it, thus makes the note editor lose it. |
| FIXED | Package manager list of packages could sometimes look broken when switching back and forth between the online and DVD packs. |
| FIXED | Loud audio blowouts using the E-kick device with certain parameter settings. |
| FIXED | Adaptive timeline grid mode should be disabled when the user changes grid subdivisions. |
| FIXED | Regression: changing shuffle time needs audio engine restart to take effect in 1.0.11. |